Filter
Top Products
Loading and Playing Cassettes:
Press the release button to slide open the faceplate, showing
the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The tape will start playing.
Push back the bottom of the faceplate with your hand until it
locks.
The IN indicator lights up when a cassette has been loaded.
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing to
do so might deform the tape.
Playing Cassettes Already Loaded:
Press the SRC (Source) button repeatedly to select the tape
mode.
"TAPE" is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the other side.
Ejecting Cassettes:
Press the release button and slide open the faceplate.
Press the 0 button.
The tape stops playing and the cassette ejects.
Push back the bottom of the faceplate with your hand until it
locks.
• When the faceplate has been slid open, it might interfere with
the shift lever or something else. If this happens, pay attention
to safety and move the shift lever or take an appropriate action,
then operate the unit.
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
• Remove a cassette from the unit when not listening to it for a
while. If you leave it in the unit too long, the tape may stick to
NOTE
2CAUTION
2CAUTION
Playing Cassette Tapes
Cassette player features
— 12 —
English
AUD
SCANB NR B.S/RDM REP MTL/M.RDM
PROGPROG
LOUD
DISP
NAME.S
PWR OFF
AUTO
AME
FMSRCPROG
4¢
AMB.S REP MTL DISP
0
B NR
Play side
B NR indicator
MTL indicator
IN indicator
Tape running display
Release button
KRC-609_U.S 00.12.26 3:29 PM Page 12