Filter
Top Products
— 20 —
English
Cassette player features (See page 6)
Switching Tape Types
Select type of tape being played.
Switching Tape Types:
Press the MTL button to switch the MTL indicator on and off
and to select the tape type.
Turn the MTL indicator off for normal tape (Type I) playback.
Turn the MTL indicator on for the following tape types:
CrO
2
(Type II) FeCr (Type III) Metal (Type IV)
Selecting the wrong tape type may cause sound quality to
suffer.
Function of the KRC-659R
Tape Advance Function
Rewinds to the beginning of the current track (or fast
forwards to the beginning of the next track), continuing tape
playback.
Rewinding tape to the beginning of current track:
Press the 4 button, and the tape will rewind to the beginning
of the current track and automatically start playing again.
To advance to the beginning of the next track:
Press the ¢ button, and the tape will advance to the
beginning of the new track and automatically start playing
again.
The tape advance function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.
NOTE
Music Repeat Function
Repeatedly plays the current track.
Turning Music Repeat Function On/Off:
Press the REP button to switch the music repeat function on
and off.
Cancelling Music Repeat Function:
Press either the REP or PROG button.
The music repeat function "knows" where a track begins by
detecting the blank space preceding it (i.e., the space between
tracks). However, when the blank space lasts for less than 4
seconds or contains noise, this function may not operate
correctly. Furthermore, sections recorded at low levels may
trigger the function if they last for 4 seconds or more.
NOTE
Switching Display for Tape
Switching the Display:
Each time you press the DISP button, the display switches
between the mode display and Clock.
• When the switching clock display (P.31) is set to off, the display
will not switch to the clock display.
• The £ indicator lights whilst the clock is displayed.
NOTE
Using Dolby B NR (Noise Reduction)
Listen to tapes recorded using the Dolby B NR system.
Turning Dolby NR On/Off:
Press the B NR button to switch Dolby B NR on and off.
The Dolby B NR indicator lights up when Dolby B NR is turned
on.
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
”DOLBY” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Function of the KRC-659R