Filter
Top Products
Cassette player features (See page 6)
Fast Forwarding and Rewinding Cassette Tapes
Fast Forwarding Tapes:
Press the FM button.
The tape indicator blinks in the direction of the tape as it is
being fast forwarded.
Rewinding Tapes:
Press the AM button.
The tape indicator blinks in the direction of the tape as it is
being rewound.
Cancelling:
Press the PROG button.
Normal tape play returns.
Blank Skip Function
Automatically fast forwards to the beginning of the next track
when long blank spaces (10 seconds or more) are detected,
continuing tape playback. This function is on, when unit is
first powered on.
Turning Blank Skip Function On/Off:
Press the B.S button to switch the blank skip function on and off.
• If the blank space contains much noise, the blank skip function
may not work right.
• Sections recorded at low levels may trigger the blank skip
function if they last for 10 seconds or more.
NOTE
Tuner Call Function
Switch automatically to the tuner whilst you are rewinding or
fast forwarding the tape.
Turning Tuner Call Function On/Off:
Press the T.C button to switch the tuner call function on and off.
Playing Cassette Tapes
Loading and Playing Cassettes:
A press of the release button results in the faceplate dropping
open to the front, thereby exposing the cassette insertion slot.
Holding the cassette with the tape exposed to the right, insert
it in the slot. The faceplate will show the control panel, and the
tape will start playing.
The ¢ indicator lights up when a caseette has been loaded.
When inserting a cassette make sure the cassette has been
completely drawn in before pushing back the faceplate. Failing
to do so might deform the tape.
Playing Cassettes Already Loaded:
Press the SRC button repeatedly until the tape mode is
obtained.
“TAPE” is displayed when the tape mode has been selected.
The tape will start playing.
Listening to the other side:
Press the PROG button.
Tape play switches to the other side.
Ejecting Cassettes:
Press the release button and drop
open the faceplate.
Press the 0 button located near
the cassette insertion slot.
The tape stops playing and the
cassette ejects.
Push back on the right side of the
faceplate with your hand until it
locks.
• When the faceplate has been dropped open, it might interfere
with the shift lever or something else. If this happens, pay
attention to safety and move the shift lever or take an
appropriate action, then operate the unit.
• Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
2CAUTION
2CAUTION
0 button
Remove a cassette from the unit when not listening to it for a
whilst. If you leave it in the unit too long, the tape may stick to
the tape head and cause the unit to malfunction.
NOTE
— 19 —