Kenwood KRC-159RA Cassette Player User Manual


 
Disc changer control features (See page 7)
Function of the KRC-259R,21R
English
— 20 —
Presetting Disc Names
Store the names of discs to be displayed when played.
Play the disc whose name you want to preset.
This function is not available for disc changers that do not feature
the Disc Name Preset function.
This procedure is not to be used to store the disc and track
titles for MDs that you record.
Hold down the NAME SET button for two seconds or more.
"NAME SET" is displayed and the disc name preset mode is
entered.
The cursor blinks in the position where character input can be
made.
Press either the 4 or ¢ button to move the cursor to the
desired position.
The 4 button moves the cursor to the left, and the ¢ but-
ton to the right.
Press the DISC+ or DISCbutton to display the desired char-
acter.
Besides the alphabet (capital letters only) and numerals, you
can choose the following characters: [, ], /, +, , *, =, <, and
>.
Continue steps 3 and 4 until all the characters are chosen for
the name.
You can enter up to 8 characters for each name.
Press the NAME SET button
The disc name is stored and the disc name preset mode is can-
celled.
If you make no entry in a 10-second period, the name will be
stored with the characters entered so far.
The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
NOTE
6
NOTE
5
4
3
2
NOTE
1
Discs are identified by their total length and number of tracks. If
you play another CD that happens to have exactly the same
specifications as another CD whose name is stored, the wrong
name will be displayed for it.
If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to enter the
changes.
Pressing the reset button does not erase the disc names stored
in a disc changer.