Filter
Top Products
4
EN
7 2-Channel stereo configuration
This is the ‘standard’ stereo operation mode, with the amplifier driving 2 speakers in stereo (such as the Surround Back Left and
Surround Back Right speakers in a THX Surround EX
®
home theater system). The amplifier delivers its rated stereo power output
into each speaker.
1 Make sure that the KMF-X9000’s power cord is unplugged from the wall outlet before making any connections.
2 According to the speakers to be used, set the speaker impedance selector switch as follows:
• For 2 Ω speakers: Set the 2Ω (STEREO)/6Ω OVER switch to 2Ω (STEREO) and 6Ω OVER/2Ω switch to 2Ω.
• For 6-16 Ω speakers: Set the 2Ω (STEREO)/6Ω OVER switch to 6Ω OVER and 6Ω OVER/2Ω switch to 6Ω OVER.
3 Connect the amplifier as shown in the diagram.
CLIP
INDICATOR
CD 2 / TAPE 2
MONITOR
SURROUND
BACK
96kfs
DISCRETE 6.1MATRIX 6.1NEO : 6
PRO LOGIC
DTS-ES
* If you connect more than one pair of speakers to the KMF-X9000, move the 2Ω (STEREO)/6Ω OVER (THX) switch to the 2Ω
(STEREO) position. The amplifier’s performance is not THX
®
-certified when the switch is set in the 2Ω (STEREO) position.
Now you can plug the power cord of this unit into the AC outlet!
CAUTION:
Before reconnecting a speaker cord or switching a selector switch, turn OFF the power and unplug the power
cord to avoid malfunctions or damage to the unit.
Preamplifier
Audio cord (supplied)
To wall AC outlet
Speakers
(2Ω-16Ω)
* In the case of 2 Ω
ON :+12 V
OFF:OPEN (or GND)
NC
GND
KRF-X9995D
For RELAY CONTROL connec-
tion to KRF-X9995D or other
compatible unit, see page 6.
Left
(L SURROUND
BACK)
Right
(R SURROUND
BACK)
In the case of 6 Ω
Stereo mini-plug cord (supplied)
For 12 V RELAY CONTROL, see page 6.