Filter
Top Products
To scroll automatically:
Press the DISP button to display the Radio Text.
The text will be displayed in one scrolling display.
Press the DISP or CLK button to change the upper part of the
display to radio text.
Holding down the DISP button for one second or more results
in one scrolling display of the text.
Please see the menu settings (page 38) about switching between
manual scrolling and automatic scrolling.
NOTE
3
2
1
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
Press the DISP or CLK button to change the upper part of the
display to radio text.
Holding down the DISP button for one second or more results
in one scrolling display of the text.
2
1
Radio Text Scroll
Changing the Preset Button Settings for Programme Type
After selecting the type of programme to be stored in a certain
preset button, hold down that button for two seconds or more.
The previously stored data for that button are erased and the
new programme type is stored.
Seeking the selected programme type
Press the 4 or ¢ button to make a seek of frequencies
with your selected type of programme.
The display blinks and the seek starts.
"PTY" blinks in the display for about 30 seconds.
If you make no key input in 30 seconds, the PTY selection
mode will turn off automatically.
If no programme can be found, "NO PTY" is displayed.
If you want to select another type of programme, repeat steps 2
and 3 above.
Switching to Other Stations with the Same Type of Programme:
When "PTY" is blinking in the display, perform auto seek
tuning.
The tuner scans for another station with the same type of
programme.
Cancelling Programme Type Function During Its Operation:
Press the 38(PTY) button.
NOTE
3
NOTE
— 21 —