Kenwood VR-506 Stereo System User Manual


 
16
Preparations
Setting up the system
Connecting the speakers
1 Strip coating.
2 Loosen.
3 Insert. 4 Secure.
Never short circuit the + and – speaker cords.
If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ral with ambiguous acoustic imaging. Be sure to connect the speak-
ers correctly.
1 Secure.
2 Insert.
Connection of banana plugs (For U.S.A. and Canada)
Sound will not be heard if the speaker terminal is not fully secured.
Speaker impedance
After confirming the speaker impedance indications printed on the rear
panel of the receiver, connect speakers with matching impedance
ratings. Using speakers with a rated impedance other than that indi-
cated on the rear panel of the receiver could result in malfunctions or
damage to the speakers or receiver.
1 Strip coating.
2 Push the lever.
3 Insert the cord. 4 Return the lever.
_4942/10-19/EN 3/16/01, 3:04 PM16