Filter
Top Products
51
Using Receiver
How Do I Operate Devices?
Turntable
To operate a turntable/record player:
1. Touch
(music) on the Quick Access menu.
2. Touch
to set the turntable as the speaker source. You will re-
main at the Music menu.
3. Play your records as normal. Please note that you cannot control the
turntable with PowerTouch; you must still operate the turntable manu-
ally.
Second CD Player or Tape Deck
These instructions are for operating a second CD player or tape deck from
a single-Room installation (VR-4700) or from Room A (VR-4900/KRF-
V9993D). For more information on operating devices in a multi-Room
setup, see “Chapter Three: Using PowerTouch in Multiple Rooms”.
To operate a second CD player or tape deck:
1. Touch
(music) on the Quick Access menu.
2. Touch
(CD2/TAPE2 ON/OFF). The CD2/TAPE2 MONI-
TOR indicator on the receiver also lights up. In this condition, the
device connected to the CD2/TAPE2 inputs can be monitored.
Each touch of
toggles its condition between ON and
OFF. After completing playback of the device connected to the CD2/
TAPE2 MONITOR, be sure to set this condition to OFF.
3. Touch
. The commands appear for the device you connected
to this jack set and identified to PowerTouch.
4. Use the available commands as your CD player or tape deck remote.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device. Touch the command to use it.
For more information on teaching commands to PowerTouch, see
“What if my device does not work with any of the codes on the list?
What if I Want PowerTouch to Control Additional Functions?” on
page␣ 39 of the Connections and Setup Guide.