Kenwood VR-4700 Stereo System User Manual


 
23
Using Receiver
How Do I Adjust the Sound?
To Set the Listen Mode manually:
1. Touch
(listen mode) on the Quick Access menu to open the Lis-
ten Mode menu.
2. Select a Listen Mode you want.
Operation on the receiver:
1. Press the LISTEN MODE key inside the door repeatedly until the lis-
ten mode to be set is displayed.
After 5 seconds, the display of the set listen mode returns to the previ-
ous menu
The available surround modes may be restricted depending on the
input signal. DTS, Dolby Digital and MPEG are only available if a
DTS, Dolby Digital or MPEG signal is present at the digital input.
In FULL AUTO or DIDITAL-AUTO mode, if the incoming signal is not
Dolby Digital, DTS or MPEG, the listen mode reverts to the last listen
mode you selected for that input.
If the speakers are turned off (i.e., because you are listening on head-
phones), you cannot select Dolby Pro Logic or Dolby 3 Stereo.