Kenwood CT-405 Stereo System User Manual


 
17
How to record (Deck B only)
÷Recording will start.
÷The deck enters the stop mode automatically when the tape has
been recorded till the end.
Press once.
4
Start recording.
1
Press the REC/ARM () key.
2
Play the music source from the begin-
ning.
How to use the MPX FILTER key
Depending on the tuner, a recorded FM broadcast may produce a
“beat” sound. In this case, press the MPX FILTER key before re-
cording. To cancel, press the MPX FILTER key again.
lights up
Use this function when recording a radio (FM) broadcasts.
REC/ARM
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
- ON OFF
237
237
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
- ON OFF
237
237
MPX FILTER
÷To adjust the bias level, play back the recorded sound and adjust to the
suitable level.Repeat if necessary.
÷The bias can be adjusted to a value of ±3.
Bias level adjustment
The MODE key can be used to adjust the bias level.
lights up
1
Press the MODE key and select the "BIAS"
mode.
2
Adjust the bias level.
The high frequency
decreases.
The high frequency
increases.
Each press of the MODE key changes the setting.
1 “LEVEL” lights up: Recording level setting mode
2 “BAL.” lights up: Recording balance setting mode
3 “BIAS” lights up: Recording bias setting mode
4 “LEVEL”,“BAL.”, and “BIAS”go off: Counter display mode
MODE
REC LEVEL/BAL
/BIAS
MIN/L MAX/R
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
- ON OFF
237
237
TAPE
A
AUTO REVERSE
TAPE
B
AUTO REVERSE
- ON OFF
237
237