Kenwood CT-403 Stereo System User Manual


 
8
Controls and indicators (KXF-W1030 / CT-401)
DISPLAY
DOLBY NR reference level
(dB)
5
0 +3 +6 (dB)
DPSS
TAPE BTAPE A
POWER
- ON OFF
1
37
37
¡ 18
PAUSE
REC/ARM
¡
REC LEVEL
MIN MAX
PUSH/OPEN
0
PUSH/OPEN
0
DOLBY NR DUBBING
DUBBINGDOLBY NR
(dB)
5
0 +3 +6 (dB)
DUBBINGDOLBY NR
PEAK LEVEL METER
PEAK LEVEL METER
FULL LOGIC CONTROL FULL LOGIC CONTROL
21 0
34 567
89
!@
DISPLAY
1 Deck A
Playback-only tape deck.
2 POWER switch:
Press to turn power - ON and OFF.
3 Deck A operation keys
3 key :
Play key.
1 key:
Rewind key. (for fast winding of tape
toward the left reel seen from you)
33 key:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
7 key:
Stop key.
4 Cassette holder (Deck A)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
5 Cassette holder (Deck B)
Press the area marked "PUSH/OPEN
0" to load or eject a tape.
6 Deck B operation keys
3 key :
Play key.
1 key:
Rewind key (for fast winding of tape
toward the left reel seen from you)
33 key:
Fast forward key (for fast winding of
tape toward the right reel seen from
you)
7 key:
Stop key
REC/ARM key:
Press in stop mode to start recording
or press in record mode to let the
recording pause after leaving a non-
recorded blank of 4 seconds.
indicator : (Recording indicator)
8PAUSE key:
Press to let recording pause temporarily.
7 REC LEVEL control:
Adjusts the recording level.
8 DUBBING key:
Press to start tape dubbing.
9 DOLBY NR key:
Press to select the Dolby Noise Reduction
mode.
0 Deck B
Tape deck which is capable of both
playback and recording.
! DOLBY NR indicator
@ DUBBING indicator