Kenwood CT-403 Stereo System User Manual


 
20
Specifications
Note
Note
Track System 4 track, 2 channel stereo
Recording System AC bias (Frequency: 105 kHz)
Heads A DECK
Playback heads......................................... 1
B DECK
Playback / recording heads ................... 1
Erasing head ............................................. 1
Motors A and B DECK ................................................. 1
Wow and Flutter ....................................... 0.3 % (W.RMS)
Frequency Response
TYPE I Tape............................ 30 Hz to 13,000 Hz, ± 3 dB
TYPE II Tape........................... 30 Hz to 13,000 Hz, ± 3 dB
Signal to Noise Ratio
Dolby NR OFF ............................................................ 57 dB
Dolby B NR ON (3rd, H.D., 3 %, TYPE II Tape) .... 66 dB
Input sensitivity / Impedance
LINE IN ................................................... 122.8 mV / 54 k
Output Level / Impedance
LINE OUT................................................. 775 mV / 1.1 k
[General]
Power Consumption ..................................................... 14 W
Dimensions W ............................ :440mm (17-5/16”)
H .............................. :128 mm (5-1/16”)
D ............................. : 270 mm (10-5/8”)
Weight (Net)................................................... 4.1 kg (9.0 lb)
Caution : Read this page carefully to ensure safe operation.
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without
notice.
2. The full performance may not be exhibited in extremely coud location (under a water-freezing temperature).
For your records
Record the serial number, found on the back of the unit, in the
spaces designated on the warranty card, and in the space provided
below. Refer to the model and serial numbers whenever you call
upon your dealer for information or service on this product.
Model Serial Number