Kenwood CT-2050 Stereo System User Manual


 
11
CT-2050/203/KXF-W6010/W4010 (En/M)
Normal playback
Listening to cassette tapes
Preparation
Make “Playback (recording) preparation”.
0
Zero-stop operation
To play side B.
To play side A.
÷The 8 indicator lights.
Fast winding in the | direction
To stop playback
To pause playback (CT-203/KXF-W4010; Deck B only)
÷Do not press the eject (0) button until the tape has stopped
completely.
1
Stop playback.
Usage of counter
Before starting recording (playback), press the RESET A or
RESET B key to reset the counter to “0000”, and write down the
counter reading when the recording (playback) should be stopped in
the middle of the tape, etc.; this will make it easy to locate the same
position when you want to continue recording (playback) next time.
It is also possible to use the Zero-stop function to return to the
position where recording (playback) was started.
Display example.
÷Tape is wound until counter reading near “0000” where it stops.
÷Press the stop (7) key to stop fast tape winding.
2
Press the 1 key or ¡ key.
1: Fast tape winding in the |
direction.
¡: Fast tape winding in the \
direction.
Start playback Fast forwarding or rewinding tape
Press simultaneously.
Press simultaneously.
Fast winding in the \ direction
Deck A counter.
÷Tapes are played in the directions indicated by their respective
indicators on the display.
Press the play (2 or 3) key.
237
237
¡1
8
PAUSE
CT-2050/KXF-W6010
CT-203/KXF-W4010
PHONES
To use the headphones
Connect commercially-available stereo headphones to the PHONES
jack for private listening.
237
7
¡1
7
¡1
RESET A