Filter
Top Products
English
|
43
Function of the KDC-W8531/KDC-W7531
In CD mode
Unique ID display
Displaying the serial number for each product.
1 Select the unique ID display mode
Push the Control knob to [FM] or [AM].
Select the "ACD Unique ID" display.
2 Display the unique ID
Push the Control knob to [4] or [¢].
Other than Standby mode
Audio Preset Memory
Registering the value setup by Sound Control. The
memory can't be erased by the Reset button.
1 Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 12)
- <Audio Setup> (page 12)
- <Equalizer Control> (page 13)
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3 Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "Audio Preset" display.
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
5 Select the Audio Preset Memory
Push the Contol knob to [FM] or [AM].
Select the "Memory" display.
6 Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "Memory" display blinks 1 time.
7 Exit Menu mode
Press the [MENU] button.
• Register 1 pair of Audio Preset Memory. You can't
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items can't be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume, System Q Setting
Other than Standby mode
Audio Preset Call
Recalling the sound setup registered by <Audio
Preset Memory> (page 43).
1 Select the source
Press the [SRC] button.
2 Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3 Select Audio Preset mode
Push the Control knob to [FM] or [AM].
Select the "Audio Preset" display.
4 Enter Audio Preset mode
Press the Control knob for at least 1 second.
5 Select the Audio Preset Call
Push the Contol knob to [FM] or [AM].
Select the "Call" display.
6 Call up the Audio Preset
Press the Control knob for at least 2 seconds.
The "Call" display blinks 1 time.
7 Exit Menu mode
Press the [MENU] button.
• The User memory of <Equalizer Control> (page 13) is
changed to the value which was recalled.
• The source tone memory item of <Audio Control>
(page 12) is changed to the value which was recalled
by the selected source.