Filter
Top Products
8
|
KDC-W3041/KDC-W312/KDC-W241/KDC-241
Tuner Operation
Function of KDC-W3041/KDC-W312/KDC-241
PTY (Program Type)
Selecting the Program Type and searching for a
station.
1 Enter PTY mode
Press the center of the Control knob.
During PTY mode the “PTY” indicator is ON.
⁄
• This function cannot be used during a traffic bulletin or
AM reception.
2 Select the Program Type
Press the top or bottom side of the Control
knob.
No. Program Type Display
1. Speech “SPEECH”
2. Music “MUSIC”
3. News “NEWS”
4. Current Affairs “AFFAIRS”
5. Information “INFO”
6. Sport “SPORT”
7. Education “EDUCATE”
8. Drama “DRAMA”
9. Culture “CULTURE”
10. Science “SCIENCE”
11. Varied “VARIED”
12. Pop Music “POP M”
13. Rock Music “ROCK M”
14. Easy Listening Music “EASY M”
15. Light Classical “LIGHT M”
16. Serious Classical “CLASSICS”
17. Other Music “OTHER M”
18. Weather “WEATHER”
19. Finance “FINANCE”
20. Children’s programs “CHILDREN”
21. Social Affairs “SOCIAL”
22. Religion “RELIGION”
23. Phone In “PHONE IN”
24. Travel “TRAVEL”
25. Leisure “LEISURE”
26. Jazz Music “JAZZ”
27. Country Music “COUNTRY”
28. National Music “NATION M”
29. Oldies Music “OLDIES”
30. Folk Music “FOLK M”
31. Documentary “DOCUMENT”
⁄
• Speech and Music include the Program type shown
below.
Music: No.12 — 17, 26 — 30
Speech: No.3 — 11, 18 — 25, 31
3 Search for the selected Program Type station
Press the right or left side of the Control knob.
⁄
• When the selected Program Type is not found, “NO PTY”
is displayed. Select another Program Type.
4 Exit PTY mode
Press the center of the Control knob.
Program Type preset
Putting the Program Type in the Preset button
memory and quick recall.
Presetting the Program Type
1 Select the Program Type to preset
Refer to <PTY (Program Type)>.
2 Preset the Program Type
Press the desired [1] — [6] button for at least 2
seconds.
Recalling the preset Program Type
1 Enter PTY mode
Refer to <PTY (Program Type)>.
2 Recall the Program Type
Press the desired [1] — [6] button.
Changing Language for PTY Function
Selecting the Program Type display language.
1 Enter PTY mode
Refer to <PTY (Program Type)>.
2 Enter Changing Language mode
Press the [TI] button.
3 Select the language
Press the top or bottom side of the Control
knob.
Language Display
English “ENGLISH”
French “FRENCH”
German “GERMAN”
4 Exit Changing Language mode
Press the center of the Control knob.