Filter
Top Products
6
|
KDC-MP6539U/ KDC-MP6039
Category Item Setting Entry Setting overview Condition Page
MENU “Security Set”
1 sec.
Sets security code
13
“SRC Select” “1”*/ “2”
Sets the source selection method.
21
“iPod Mode”*
1
“OFF”/ “ON”*
When set to “ON”, allows you to select music in the manner
similar to that of the iPod.
11
“AT COL CHG”*
1
“OFF”/ “iPod”*
When the iPod source is used, sets whether the illumination
color is changed by the iPod.
21
“Beep” “OFF”/ “ON”*
Setting the operation check sound (beep sound) ON/OFF.
“Clock Adjust” 1 sec.
Sets the clock.
14
“Date Adjust” 1 sec.
Sets the date.
14
“Date Mode” 7 types
1 sec.
Sets the date display mode.
“Display” “OFF”/ “ON”*
Turns off the display when no operation is performed.
—21
“Dimmer” “OFF”/ “ON”*
Dims the display part in conjunction with the light switch of
the vehicle.
“ILM Dimmer” “AUTO”*/ “MNAL1”/
“MNAL2”*
2
/ “OFF”
Sets whether the key illumination is dimmed in conjunction
with the light switch of the vehicle or it is dimmed constantly.
21
“ILM Effect” “OFF”/ “ON”*
Sets whether the key illumination color*
1
/brightness*
2
is changed in conjunction with the key operation. (*
1
To
connect the Bluetooth unit)
“ILM MSC
SYNC”
“OFF”*/ “ON”
Sets whether the key illumination color*
1
/brightness*
2
is
changed in conjunction with the sound volume.
—
“AMP” “OFF”/ “ON”*
Turns on/off the built-in amplifier.
21
“Zone2” “Rear”*/ “Front”
Specifies the destination of AUX input sound when the Dual
Zone function is turned on.
21
“Supreme” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
21
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception is
poor.
“Name Set” 1 sec.
Sets the station name (SNPS)/ disc name (DNPS)/ AUX name.
10
“Chinese”*
1
“OFF”*/ “ON”
Selects Chinese as the display language.
21
“Scroll” “Auto”*/ “Manual”
Specifies whether the text is scrolled automatically.
—
“Built in AUX” “OFF”*/ “ON”
Sets whether to display AUX during source selection.
“CD Read” “1”*/ “2”
Sets the CD read mode.
21
“Audio Preset” 1 sec.
Presets the setting value of the audio control. The preset
value is retained after resetting.
16, 17
“DEMO Mode” “OFF”/ “ON”*
2 sec.
Specifies whether to enable demonstration.
—14
DISP > TYPE A/ B/ C/ D/ E/ F/ G
Sets the display pattern.
—8
> GRAPH
Spectrum Analyzer 1 – 2
Sets the Type E spectrum analyzer display.
‰
> SIDE Text icon/ Source
icon
Sets the Type A side icon display.
Å
> TEXT
Sets the text display.
ÅıÇÎ
Ï
8
K-COL*
1
Sets the button illumination color.
9
P.MEM
Presets a station.
12, 18
SCAN “ON”/ —
When set to “ON”, plays the intro of the music in the folder
successively.
RDM “ON”/ —
When set to “ON”, plays the music in the folder randomly.
FiREP “ON”/ —
When set to “ON”, plays the music repeatedly.
FoREP “ON”/ —
When set to “ON”, plays the music in the folder repeatedly.
SCAN “ON”/ —
When set to “ON”, plays the intro of the music on the disc
successively.
RDM “ON”/ —
When set to “ON”, plays the music on the disc randomly.
Function Control
Functions in the table below can be set up by using Function Control.