Filter
Top Products
Source tone memory
Each source (CD, FM, AM and disc changer) has its own memory
in which to store the bass, middle and treble tone settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Press the AUD button to end the control mode.
Determining the parameters in the audio control setting will clear
all the adjustments made in the System Q and they are replaced
with the values made in the audio control setting.
NOTE
4
Adjustment
mode
(Display)
Bass ("Bass")
Treble("Treble")
Balance("Balance")
Fader ("Fader")
Bass decreased.
Treble decreased.
Bass increased.
Treble increased.
Middle("Middle")
Middle decreased.
Middle increased.
4 button ¢ button
Operation of Audio control button
Front channel increased.
Rear channel increased.
Volume Offset
("V Offset")
The sound level of
each source increased.
The sound level of
each source decreased.
Right channel emphasized.
Left channel emphasized.
3
NOTE
Adjust various parameters of sound quality.
Hold down the AUD button for one second or more to enter
the control mode.
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Bass
Treble
Middle
Balance
Fader
Volume Offset
2
1
Audio Control Setting
As you proceed, each indicator would go on.
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, and treble level.
Their setting values are different depending on the setting of the
speaker setting mode.
NOTE
Flat
Easy
Rock
Jazz
Pops
Top 40
Scan of Flat – Easy
(Default setting)
User memory*
*User memory:
The unit returns to the state
adjusted the last time with
the audio control setting feature.
— 11 —