Filter
Top Products
6
|
KDC-MP5043U/ KDC-MP543U/ KDC-MP443U
*Factory setting
*
1
Function of KDC-MP5043U/ MP543U
Displayed item is depending on currently selected
source or mode. The mark in Condition column
shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB
(excluding iPod).
: Can be set only during playback of the iPod source.
(USB source used when the iPod is connected)
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
— : Can be set during all sources.
⁄
• Refer to the respective page for information on how to
set the items with reference page number.
• Only the items available to the current source are
displayed.
• Strong electrical fields (such as from power lines) may
cause unstable sound quality when CRSC is turned ON.
In such a situation, turn it OFF.
Item Setting Entry Setting overview Condition Page
“CODE SET”/
“CODE CLR”
1 sec.
Sets/Resets security code.
10, 11
“SKIP”*
1
“0.5%”*/ “1%”/
“5%”/ “10%”
Sets the ratio of skip performed with <Music Search>.
8
“DIM” “OFF”*/ “ON”
Adjusts the brightness of the display according to the surrounding
illumination.
—
“ICON” “OFF”/ “ON1”/
“ON2”*
Sets the Graphics mode of the display.
15
“SWPRE” “R”*/ “SW”
Sets the preout output.
15
“SPRM” “OFF”/ “ON”*
Turns ON/OFF the Supreme function.
15
“AUTO1”/ “AUTO2”/
“MANUAL”
“AUTO1”*/ “AUTO2”/
“MANUAL”
Selects the tuning mode of the radio.
15
“CRSC” “OFF”/ “ON”*
Switches to Monaural to decrease noise when reception is poor.
“NAME SET” 1 sec.
Sets the display when switched to AUX source.
7
“SCL” “AUTO”*/ “MANU”
Specifies whether the text is scrolled automatically.
—
“AUX” “OFF”/ “ON1”*/
“ON2”
Sets whether to display AUX during source selection.
15
“CD READ” “1”*/ “2”
Sets the CD read mode.
15
“DEMO” “OFF”/ “ON”* 2 sec.
Specifies whether to enable demonstration.
—11
Menu System
Set up the following functions.
1 Enter menu mode
Press the Search button for at least 1 second.
“MENU” is displayed.
2 Select the menu item
Press the [FM+] or [AM–] button.
3 Set the menu item
Press the [4] or [¢] button.
4 Exit menu mode
Press the Search button.