Filter
Top Products
9
KAF-3010R/1010 (En)
Operation of remote control unit
(KAF-3010R only)
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light
sensor. In such a case, change the system installation position to prevent the malfunction.
Loading batteries
1
Remove the cover.
2
Insert batteries.
3
Close the cover.
Pressing the POWER key on the remote control when the
standby indicator is lit turns ON the power. After the power
comes ON, press the key you want to operate.
Operation procedure
6 m
Operating range
(approx.)
Remote sensor
•
Insert two AA-size (R6 / SUM-3) batteries as indicated by the
polarity marking.
Model: RC-A0300
Infrared ray system
Notes
Notes
30°
30°
•
When two operation keys on the remote control unit are pressed
successively, press each key securely reserving an interval of
more than 1 second for each press.
................................................................................................................
................................................................................................................