Kenwood KAF-3010R Stereo Amplifier User Manual


 
7
KAF-3010R/1010 (En)
Main unit
Controls and indicators
About the standby indicator (KAF-3010R only)
This unit has a standby indicator that lights to show that a small amount of current is being supplied to the unit in order to preserve the
memory. This is called the Standby mode. When the Standby indicator is lit, the amplifier can be switched ON / STANDBY from the remote
control.
1 POWER switch (KAF-3010R) 0
Usually leave this switch to the on position.
When the unit is not to be used for a long period of time, set
the switch to the OFF position for safety.
2 ON/STANDBY key (KAF-3010R) 0
This key effective when the POWER key is set
to the on (standby) position, and pressing this key
turns power ON and off (standby).
3 Standby indicator (KAF-3010R)
4 POWER switch (KAF-1010) 0
5 BASS knob !
To adjust low frequencies.
6 TREBLE knob !
To adjust high frequencies.
7 INPUT indicator 0
An indicator lights for the source selected
with the INPUT SELECTOR knob.
8 VOLUME CONTROL knob 0
Adjust the volume.
9 SOURCE DIRECT indicator @
0 SOURCE DIRECT key @
To listen to a source with high quality sound.
! PHONES jack @
Used for headphone listening.
@ SPEAKERS A/B switches 0
Press to select the A and/or B speaker systems.
# BALANCE knob !
Adjust the volume balance between left and right.
$ INPUT SELECTOR knob 0
Turn to select the input sources.
% MUTING key/indicator !
Mute the sound temporarily.
^ LOUDNESS key/indicator !
Use to emphasize deep bass sounds.
& Remote sensor (KAF-3010R only) 9
PHONES A SPEAKER B BASS TREBLE BALANCE
INPUT SELECTOR
MUTING LOUDNESS
ON OFF
POWER
ON/STANDBY
MIN MAX
VOLUME CONTROL
MDTAPETUNERPHONOCD
SOURCE DIRECT
thermally reactive advanced instantaneous transistor
TRAIT
LR
3
142
56 7 8 9 0
&^%$#@!
ON OFF
ON OFF
POWER
POWER
ON/STANDBY
KAF-3010R KAF-1010