Filter
Top Products
21
DVR-5070 (EN)
Operations
Playback of disc
Basic play
Load a disc
1
1Open the tray.
2Place a disc.
3Close the tray.
Start playback
3
TITLE No. (DVD)
CHAPTER No. (DVD)
TRACK No. (CD)
Time display
To stop playback
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
÷ Press 8 key on the remote
control unit to pause the disc.
RESUME playback
When a menu screen is recorded on the
disc, the menu screen will be displayed
when the TOP MENU key is pressed. At
the menu screen, the menu can be se-
lected by pressing the Cursor keys.
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
Label side
MAIN UNIT
MAIN UNIT
REMOTE
MAIN UNIT
REMOTE
STOP key
PLAY/PAUSE key
DVD CD key
3(Play) key
8(Pause) key
7(Stop) key
INPUT key
Select the DVD CD
2
MAIN UNIT
REMOTE
DVD CD
SELECT
AUTO/MONO
÷ Each press PLAY/PAUSE
key on the main unit
pauses and plays the disc
alternately.
T
O
P
M
E
N
U
GUIDE
÷ When the PLAY/PAUSE key on the main unit is pressed
instead of the EJECT key in step 3, the tray will close
and playback will start automatically.
÷ When a disc is set on the tray and DVD/CD is selected,
playback of the disc will be started automatically.
÷ When the PLAY/PAUSE key on the main unit is pressed while
an input other than disc is selected, the unit will be switched to
DVD/CD and playback will start.