Filter
Top Products
16
|
DPX-MP5110U/DPX-MP4110/DPX-MP3110
Basic Operations of remote control
SRC
VOL
ATT
AUD
ATT
DIRECT
0 — 9
SRC
VOL
AUD
FM/AM/
+
/
–
2-ZONE
Demonstration mode Setting
Turning the demonstration mode ON/OFF.
1 Select Demonstration item during Menu mode
Select the “DEMO” display.
For how to select menu items, refer to <Menu
System>(page 14).
2 Set the Demonstration mode
Press the Control knob for at least 2 second.
Pressing this button for 2 seconds or longer toggles
the setting between ”On” and ”Off”.
3 Exit Demonstration mode
Press the [M.JOG] button.
Menu Operation
General control
Volume control [VOL]
Source select [SRC]
Volume reduce [ATT]
When the button is pressed again, the volume returns
to the previous level. When the volume is reduced,
the "ATT" indicator ashes.
In Audio control
Audio item select [AUD]
Adjusts the Audio item [VOL]
⁄
• Refer to <Audio Control> (page 7) for the operation
method, such as the procedures for Audio control and
others operations.
• The remote control can only select and adjust the Basic
Audio item. Selecting and adjusting of the Detail Audio
item cannot be done.