Filter
Top Products
DP-R7090/R6090 (En)
14
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
÷ Load a disc in the CD player.
Press so that the “PGM” indicator lights.
1
Preparation
÷The programmed contents remain in memory.
P.MODE
Do this operation in the stop mode.
REMOTE CONTROL UNIT
RC-P0601
GP0M1 1DTON2.5
«
GP0M1 BADCFEHG
In the case of a CD-TEXT disc, the track's title is scrolled on the display.
GP0M1 1DTON2.5
÷Tracks can also be selected by pressing the 4 or ¢ key.
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
÷If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
7
To stop playback
÷When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
÷When the 4 key is pressed once during playback, the play position
returns to the beginning of the current track being played.
6
Start playback.
3
4 Repeat steps 1, 2 and 3 above.
P.MODE
Program desired tracks.
2
GP0M1 1DTON?.?
1 Select the disc.
DISC SELECTOR
12
3
4
5
Go to step 2 within 8 seconds.
3 Set the entry.
Go to step 3 within 8 seconds.
12
3
45
6
78
9
0 +10
2 Select the desired track No.
In the case of a CD-TEXT disc, the disc title is scrolled on the display.
Press the numeric keys as shown below....
To enter track No. 25 : 005
: Keys and control used in the operations described on this page.
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
REMOTE CONTROL UNIT
RC-P0601
GP0M1 IDCS?
Blinks.