Kenwood DP-R7090 CD Player User Manual


 
DP-R7090/R6090 (En)
4
System connections
Caution:
Do not plug in the power lead until all connections are com-
pleted.
Malfunction of microcomputer
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
£
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer
dimensions including projections) equal to, or greater than, shown below.
Left and right panels: 10 cm Rear panel: 10 cm
AC110-220V AC220-240V
L
R
VARIABLE
LINE OUTPUT
DIGITAL OUTPUT
SYSTEM CONTROL
OPTICAL
COAXIAL
SL16 XS 8
ƒ
DIGITAL
INPUT
OPTICAL
L
R
CD
SYSTEM
CONTROL
TEXT
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
Notes
Notes
75 coaxial cable with RCA PIN.
(Commercially-available)
Commercially-available
optical fiber cable
SL 16/XS8 switch 6
(OPTICAL)
DIGITAL INPUT
(COAXIAL)
Digital component (MD, DAT, etc.)
System control cord
Remove the protection cap when using
the DIGITAL OUTPUT (OPTICAL) jack.
Commercially-available
optical fiber cable
Digital amplifier
(or ordinary amplifier,
␣ ␣ ␣ receiver, etc.)
To wall AC outlet
Audio cord
To AC outlet