Filter
Top Products
CD-206/204/203/DPF-R6010/R4010/R3010 (En)
16
Press to clear tracks from the end.
To clear tracks from the program
To clear all tracks
÷Each time the key is pressed, the last track in the program is cleared.
÷The tracks which are programmed earlier than the track being played
cannot be cleared.
÷Selected tracks can be also completely cleared just by operating the 0
key.
÷The entire program is cleared.
÷Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By record-
ing tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
Time display on CD player (TIME DISP.)
Each press of the TIME DISP. (TIME DISPLAY) key changes
the displayed contents.
1 1:23 : Elapsed time of track being played
2 -2:23 : Remaining time of track being played
3 23:45T : Elapsed time of entire disc (T lights up.)
4 -36:25T : Remaining time on entire disc (T lights up.)
÷Only the display 1 and 2 will be displayed in PGM, RANDOM and EDIT
modes.
Do this operation in the play mode.
TIME DISP.
CD-206/DPF-R6010
CD-204/203/DPF-R4010/R3010
REMOTE CONTROL UNIT
RC-P0601
CLEAR
CLEAR
P.MODE
To program all tracks on a disc (CD-204/203/DPF-R4010/R3010 only)
3
Press the P. MODE key again.
2
Select the desired disc.
1
Press so that the "PGM" indicator lights.
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5
P.MODE
P.MODE
ALL
109876
54321
P_ 01
ALL indicator lights up.
CD-206/DPF-R6010
CD-204/203/DPF-R4010/R3010
1 1:23 : Elapsed time of track being played (SINGLE lights up.)
2 -2:23 : Remaining time of track being played (SINGLE lights
up.)
3 23:45 : Elapsed time of entire disc (TOTAL lights up.)
4 -36:25 : Remaining time on entire disc (TOTAL lights up.)
Programmed play (PGM mode)