Filter
Top Products
RECEIVER OPERATION
15
Headset
The headset connection on the front is designed
for a 6.3 mm stereo jack plug. The headset volume
can be adjusted independently of the audio con-
nections, if the
MUTE
key is used to turn off the
sound at the audio connections.
Adjustment of the balance and tone control is not
possible at the headset connection.
Favorite mode
Favorite
mode allows you to specify a program
sequence that corresponds to your particular re-
quirements.
In Favorite mode it is possible to store
DMX
-,
ADR
- and
analog-
radio programs in any desired
sequence.
Favorite mode comprises 200 program storage lo-
cations, which are divided up into 5 banks each
containing 40 storage locations. This allows an ar-
rangement of 5 arbitrary program sequences, so
that each family member can assemble their own
personal program bank for example.
Display of favorite program numbers
F01#1....F40#5
F
= Favorite program number
1
to
40
Selection of favorite program numbers 1...40 with
the
keys or the numeric keys
0-9
.
#
= Program bank
1
to
5
Selection of program bank 1...5 with the
FAVORITE
key
Programming Favorite Programs
Call up the programming mode for the Favorite-
programs
Press
MODE + FAVORITE
in succession
⇓
Display readout:
ASSIGN
entry
→ [OK]
⇓
Press key ok
⇓
Display readout: FAVORITE-No F..#.*
List selection → [ ok ]
*(last selected favorite program postion)
⇓
Setting of desired program bank with:
FAVORITE
Setting of desired
program position with:
or the numeric keys 0..9
⇓
Press key ok.
⇓
Display readout: Display of selected pro-
gram alternately flashing with [ok]
⇓
Input of the desired program from the DMX-,
ADR- or analog radio bank.
⇓
Confirm input with ok.
⇓
Setting of next program position and input of
further favorite programs in the same man-
ner.
⇓
Exit from programming mode with key
BACK
(press repeatedly).
Display information
In ADR/DMX mode it is possible to display the fol-
lowing information:
⇒ Title
⇒ Interpreter (Artist)
⇒ Album
⇒ Author
⇒ CD-No.
The setting that determines which of the above-
listed information (TTA data) is to be displayed is
carried out in the Info menu.
The Info menu is called up with MODE +
i
(press in succession)
⇒ Confirm selection with key OK
⇒
Step on to further menu entries by means of the
keys
⇒ Activation of menus with ok
⇒ Setting of parameters with
⇒ Back with Back
See also Structure of the Info Menus at the end of
this manual!