Filter
Top Products
LCD DISPLAY INFORMATION
WHEN POWER ON
• If disc is in, starts auto adjustment. During
adjustment, display shows - -.
• If no disc, then disc is displayed.
Put the disc and close the lid, then starts auto
adjustment again.
• If the lid is opened, display shows OPEN.
Closing the lid starts auto adjustment.
• If can't read TOC then Er is displayed.
Note: TOC means Table Of Contents.
• When TOC data has been read, display shows TOC
1 second.
• Starts play from track No. 1 automatically.
ANTI-SHOCK starts flashing.
TO PLAY FROM STOP CONDITION
• Press PLAY/PAUSE button,
then display changes to 01 00:00 and starts play.
• When the memory full condition,
ANTI-SHOCK stops flashing.
TO STOP
Press STOP key, then stops play and TOC is displayed.
TO PAUSE
Press PLAY/PAUSE button, then pause on/off
alternately. On pause condition, time display is
flashing.
6
CLEANING DISCS
• Finger prints should be carefully wiped from
the surface of disc with a soft cloth. Unlike
conventional records, compact discs have no
grooves to collect dust and microscopic debris,
so gently wiping them with a soft cloth should
remove most particles. Wipe in a straight
motion from the center to the edge.
• Never use thinner, benzine, record cleaner or
anti-static spray on a compact disc. Such
chemicals can damage its plastic surface.
BASIC DISC PLAY
This CD-player can play Audio Discs such as CD-Recordables and CD-Rewritables.
Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.
1. Connect the headphones to the PHONES (GREEN) socket.
2. Press the OPEN button to open the CD compartment lid.
3. Adjust the VOLUME to minimum.
4. Insert the disc with the label side facing up.
5. Close the lid securely until a click is heard.
6. Press the PLAY button to start playing.
To Emphasize the bass sound
Set the BASS BOOST switch to the ON position.
Note: The bass boost performance will be dependant on the
VOLUME control setting.
HOLD Switch
This switch prevents accidental selection of an unwanted
function during Playback or Stop mode. In the HOLD "ON"
position, no function button on the unit can operated
(except OPEN). Moving the switch to the "OFF" position,
the unit returns to normal operation.
Turning Power on and off
This unit has no ON/OFF switch. To turn on and off, press the following buttons.
To turn on: Press >II PLAY/PAUSE (playback starts).
To turn off: Press ■ STOP button once to standby mode.
If press ■ STOP button twice, it will be turn off the power immediately.
Auto power-off function
When the unit is stopped (standby mode) for approximately 30 seconds, the power
is automatically turned off.
7
HOLD
OFF ON
BASS BOOST
ON OFF