Portable CD Radio Cassette Recorder V10M10_IM_EN_11282007
www.jWIN.com - 8 -
OPERATING INSTRUCTIONS
Listening to the Radio
Slide the FUNCTION SWITCH to the AM or FM position. Turn the TUNING KNOB to your
desired radio station. Adjust the sound level by rotating the VOLUME CONTROL KNOB. To
turn off the radio, simply slide the FUNCTION SWITCH to TAPE position.
Note: Radio frequency is shown on the TUNING READER.
Listening to Cassettes
Slide the FUNCTION SWITCH to the TAPE position. Open the CASSETTE DOOR and place a
cassette tape in the player. Use the Cassette Controls (PLAY, PAUSE, F.FWD, REWIND,
RECORD, or STOP) to control the cassette playback. Adjust the sound level by rotating the
VOLUME CONTROL KNOB.
Recording to Cassettes
The cassette player on the JX-CD438 has Automatic Level Control to automatically set the
recording level for optimum performance.
RECORDING FROM THE RADIO
1. Slide the FUNCTION SWITCH to AM or FM and use the TUNINIG KNOB to find your
desired radio station.
2. Open the CASSETTE DOOR and insert a recordable cassette tape.
3. Press the CASSETTE RECORD and CASSETTE PLAY buttons at the same time to begin
recording from the selected radio station.
4. To stop recording, press the CASSETTE STOP / EJECT button.
RECORDING FROM A CD
1. Slide the FUNCTION SWITCH to CD.
2. Open the CD DOOR and insert a CD into the compartment.
3. Close the CD DOOR.
4. Press the CD PLAY / PAUSE BUTTON to begin CD playback.
5. Press the CASSETTE RECORD and CASSETTE PLAY buttons at the same time to begin
recording from the CD.
6. To stop recording, press the CASSETTE STOP / EJECT button.
Listening to CDs
Open the CD DOOR by pressing the CD OPEN BUTTON. Place a CD disc into the CD
COMPARTMENT and close the CD DOOR. Set the FUNCTION SWITCH to the CD position.
Adjust the sound level by rotating the VOLUME CONTROL KNOB. Follow the Operational
Instructions in the following pages of this manual.
Note: Before playing a CD make sure the CD DOOR is properly closed.