Jwin JX-CD483 CD Player User Manual


 
Portable CD Radio Cassette Recorder V10M10_IM_EN_11282007
www.jWIN.com - 7 -
GETTING STARTED
Location of Controls-continued
1. HANDLE 14. TUNING KNOB
2. FM ANTENNA 15. CD REPEAT BUTTON
3. CD DOOR 16. CD PROGRAM BUTTON
4. VOLUME CONTROL KNOB 17. CD SKIP/SEARCH BUTTON
5. AM / FM / CD / TAPE SWITCH 18. CD PLAY / PAUSE BUTTON
6. CASSETTE PAUSE BUTTON 19. CD STOP BUTTON
7. CASSETTE STOP / EJECT BUTTON 20. STEREO SPEAKERS
8. CASSETTE FAST FORWARD BUTTON 21. REPEAT INDICATOR
9. CASSETTE REWIND BUTTON 22. PLAY/PROGINDICATOR
10. CASSETTE PLAY BUTTON 23. LED SCREEN
11. CASSETTE RECORD BUTTON 24. CASSETTE DOOR
12. CD DOOR OPEN BUTTON 25. POWER INDICATOR
13. TUNING READER
AC Operation
Before operating the JX-CD438, make sure that the voltage on the unit corresponds to the
voltage of your local area. Unravel the AC Line Cord; insert one end into an AC socket on the
unit and the other end into a standard AC outlet.
1. In case of malfunction due to electrostatic discharge (ESD), reset the unit by
reconnecting the AC cord again to resume to normal operation.
2. When not in use, unplug the AC power cord from the AC power socket.
Battery Operation
Disconnect the AC Cord. Open the BATTERY COMPARTMENT and insert 8 x LR14 batteries
(not included) making sure that the battery polarity (+/-) is observed.
Remove the batteries if the unit will not be used for a long period of time.
Note: The Power light will ONLY light up when the unit is connected through AC power, not
when powered by batteries.
Antenna
For best FM reception, fully extend the FM ANTENNA. For AM reception, the unit has a built-in
antenna, turn the whole unit for best reception.