Note:
Pause
Fast forward and rewind
1. Set the FUNCTION switch to TAPE.
2. Press the STOP/EJECT button. The cass-
ette holder opens.
3. Load the cassette into the cassette holder
(Fig.7). After loading the cassette, press the
cassette holder back into position.
4. Press the PLAY button to begin playback.
5. Press the STOP/EJECT button to stop play-
back at any time. Press it again to remove
the cassette.
- Use the normal tape (TYPE 1).
- Endless tapes cannot be used.
- Do not use C- 100 (or longer) tapes. They
may jam in the mechanism.
Press the PAUSE button to temporarily stop
playback or recording. Press it again to resume
operation.
Press the FFWD or REW button. When the
desired location has been reached, press the
STOP/EJECT button.
To receiveFMstereobroadcasts
To improve reception
1. Set the FUNCTION switch to RADIO.
2. Set the BAND switch to FM or AM as desired.
3. Tune in a desired station by turning the TUN-
ING control.
4. To turn the radio off, set the FUNCTION
switch to TAPE/OFF.
Set the FM MODE switch to ST.
- If the signal from an FM stereo station is weak
and reception is poor, set the FM MODE
switch to MONO. The reception may be
improved, but the sound will be monaural.
FM: Pull out the telescopic aerial and adjust its
position.
AM: Rotate the unit.
LISTENING TO TAPES
LISTENING TO THE RADIO
10