JVC XV-THS33 Home Theater System User Manual


 
Playback
18
When a DivX file is played.
You can change the time information mode (except for MP3/JPEG/
DivX). (See page 22.)
You can also check the playback information on the TV screen. (See
page 21.)
Screen saver
A TV screen may burn out if a static picture is displayed for a long
time. To prevent this, the system automatically dims the screen if a
static picture is displayed for over 5 minutes (the screen saver
function).
Pressing any button will cancel the screen saver function.
If you do not want to use the screen saver function, see page 32.
You can move back the playback position by
10 seconds from the current position.
7 During playback
On the remote control:
This function works in the same title.
This feature may not work for some discs.
7 During playback
Press y or 1.
Each time you press the button, the
search speed changes (x2, x5, x10,
x20, x60).
To return to normal speed playback
Press
3 (play button).
On the center unit:
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (x5=x20).
NOTE
When a DVD VIDEO, DVD VR, VCD, SVCD or DivX is played
back, no sound comes out during fast-forward/reverse search.
When a CD is played back, sound is intermittent and low during fast-
forward/reverse search.
This feature may not work for some discs.
For MP3,
the search speed is not shown.
The search speed for DivX is y1, y2, y3 for forward search,
and 11, 12 and 13 for reverse search.
7 Using x / 4 buttons
7 For DVD VIDEO/DVD VR
(chapter): During playback
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/JPEG/DivX (track/file): During playback or while
stopped
Press x or 4 repeatedly.
NOTE
When playing back an MP3/JPEG, you can make operations using the
file control display. (See page 24.)
When playing back a DivX file, pressing Cursor
3/2 may skip
the scene a few minutes forward/backward.
This feature may not work for some discs.
7 Using number buttons on the remote control
7 For DVD VIDEO/DVD VR (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
For VCD/SVCD (track):
During playback without PBC function
For CD/MP3/JPEG/DivX (track/file):
During playback or while stopped
Press number buttons (0-10, +10) to select
the desired number.
For details on using the number buttons, see “How to use the
number buttons” below.
One Touch Replay
111
2
33
0
:
1
3
G
1
22
T
.
.
Signal and speaker indicators
Group number Track number
Elapsed playing time (minute:second)
(during playback only)
Track number
Pressing FL DISPLAY
Fast-forward/fast-reverse
search
Skip to the beginning of a
desired selection
How to use the number buttons
To select 3: Press 3.
To select 14: Press +10, then 4.
To select 24: Press +10 twice, then 4.
To select 40: Press +10 three times, then 10.
Or press +10 four times, then 0.
See page 16 for button locations.
THS33-11[B]-05basic.fm Page 18 Monday, February 14, 2005 2:57 PM