Filter
Top Products
Connections [ Donotconnectthe powercorduntilallotherconnectionshavebeenmade. ]
• Assemblingthespeakers-- TH-C60_TH-CSO
• For TH-C60: Assemble front speakers and surround speakers.
• For TH-C50: Assemble front speakers.
For the surround speakers of TH-C50, see "Connecting the
surround speakers -- TH-C50". (See page 10.)
ForTH-C60
Front speaker Surround
(SP-THC6OF)(2) speaker
(SP-THC60S) (2)
B
Stand (4)
Base plate (4)
• Check file model name of each speaker from the label on the
rear to locate eacll speaker correctly.
For TH-CSO
Stand (2)Front speaker Base plate (2)
(SP-THC6OF)(2)
Assembled speakers
or
With stand: Refer to steps 1to Without stand: Referto steps
3. 2 and 3.
Before assembling --
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injur_,c
'_"g'peaker
_ Stand
I _,,, (2) Screw MS x40 mm/M5 x 1-5/8
I \42 ch°s/supp'°dl
2 stand:
@: Usethese screws (M4 x
45 mm/M4 x 1-13/16 inches)
when assembling the speaker
the base plate.
Base plate
Stand (or speaker
directly) _
Screw M4 x20 mm/M4
x 13/16 inches
(supplied) _
When assembling the speaker with the base plate, use the
screws @.
f
Red White
You can route the speaker cord
by using speaker cord clamp
(supplied).