Filter
Top Products
22
English
MOVE Function
This function allows you to move a track to the position
you prefer. It is useful to change the order of the tracks as
you like.
• To quit any time during editing process, press TITLE/
EDIT button.
1
Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights orange.
2
Press TITLE/EDIT button until “MOVE?” appears
in the display window.
3
Press SET button.
4
Rotate MULTI JOG dial to select the track you want
to move (< / > button also available).
5
Press SET button.
• If you have selected a wrong track number, press
CANCEL button, then select the correct track
number again.
6
Rotate MULTI JOG dial to select the position where
you want to move the track (< / > button also
available).
7
Press SET button.
• If you have selected wrong tracks, press CANCEL
button, then select the correct tracks by rotating
MULTI JOG dial (< / > button also available).
• If you want to cancel the editing, press TITLE/EDIT
button.
8
Press ENTER button to finish the editing procedures.
9
Press 0 (eject) button to eject the MD.
“WRITING” appears while the editing you have made
is being recorded on the MD.
ERASE Function
This function allows you to erase an unwanted track.
• To stop any time during editing process, press TITLE/
EDIT button.
1
Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights orange.
2
Press TITLE/EDIT button until “ERASE?”
appears in the display windows.
3
Press SET button.
4
Rotate MULTI JOG dial to select the track you
want to erase (< / > button also available).
5
Press SET button.
• If you have selected a wrong track number, press
CANCEL button, then select the correct track number.
• If “TRACK PROTECTED” appears, the selected
track has been write-protected by another component.
You cannot edit such a protected track. To cancel the
editing, press TITLE/EDIT button.
6
Repeat steps 4 and 5 if you want to erase more
tracks (three tracks erasable at a time).
Continued
EN19-26.XM-G6[U]/4 99.12.09, 15:5322