Filter
Top Products
20
3
Press ¢ or 4
repeatedly to adjust the
timer-playback volume.
Press PROGRAM after adjusting
the volume.
The ON (on-time) indicator appears
and the hour indication starts flashing.
4
Set the on-time you want the unit to turn on.
1) Press ¢ or 4 to set the
hour, then press PROGRAM.
2) Press ¢ or 4 to set the
minute, then press
PROGRAM.
The OFF (off-time) indicator appears and the
hour indication starts flashing.
5
Set the off-time you want the unit to turn off.
1) Press ¢ or 4 to set the
hour, then press PROGRAM.
2) Press ¢ or 4 to set the
minute, then press
PROGRAM.
“TIMER OK” appears on the display for a
while.
6
Press TIMER ON/OFF to activate
the daily timer mode.
Each time you press the button, the Daily
Timer alternates on and off.
While activating the Daily Timer, the (timer) indicator
lights up on the display.
•You can active the Daily Timer by pressing
TIMER ON/OFF on the unit.
7
Press STANDBY/ON to turn off the unit
if the unit is on.
Using the Timers
On the remote control ONLY:
1
Press TIMER SET, then press
PROGRAM.
The (timer) indicator appears and the source
indication starts flashing on the display.
2
Select the source to play.
1) Press ¢ or 4 to select
CD, FM, or AM, then press
PROGRAM.
2) (For FM and AM only)
Press ¢ or 4 to select the preset
station you want, then press PROGRAM.
The volume indication starts flashing on
the display.
Daily Timer and Sleep Timer are available.
• Before using these timers, make sure the built-in clock is
set correctly (see page 8).
Using the Daily Timer
You can set the Daily Timer when the unit is either turned on
or in standby mode.
How the Daily Timer actually works
When the on-time comes, the unit automatically turns on and
then the off-time comes, the unit automatically turns off
(standby).
• Once the timer has been set, it will be activated at the same
time everyday until the timer is turned off and the timer
setting remains in memory until you change it.
Before you start...
You can select CD, FM, or AM as the source of the Daily
Timer playback.
•There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step
1
.
PROGRAM
PROGRAM
Continued
SET
TIMER
PROGRAM
PROGRAM
PROGRAM
ON/OFF
TIMER
UX-S10[B]_C_11timer_f.p65 06.3.10, 5:18 PM20