Filter
Top Products
39
External Components
Related
Information
Adjusting the External Component Input Level
Use the procedure below to adjust the input level for the external
component connected to the [AUX IN] terminal.
Use this adjustment when the volume from an external component
is noticeably higher or lower than other input sources at the same
volume setting.
Press the [AUX] key.
11
Select "INPUT LEVEL".
Press the [
C
] or [
D
] key.
33
Adjust the Input Level.
Press the [
A
] or [
B
] key.
44
You can adjust the input
level in a range from -3
to +5.
l
Press the [ENTER] key.
Connecting Other Accessories (Commercially Available Units)
R
P.11
Audio Settings
R
P.43 onwards
l
l
If you adjust the input level for AUX, the output level from the
[AUX REC OUT] terminal will also change.
l
Press the [MODE] key.
22
Press the [ENTER] key.
UX-J51_EN.indb 39UX-J51_EN.indb 39 10.8.19 2:51:03 PM10.8.19 2:51:03 PM