JVC UX-H330 Speaker System User Manual


 
18
Listening to the External Equipment
You can listen to the external equipment such as MD
recorder, cassette deck, or other auxiliary.
First, make sure that the external equipment is properly
connected to the unit. (See page 7.)
1
Set the volume level to the minimum position.
2
Press AUX.
AUX appears on the display.
3
Start playing the external equipment.
4
Adjust the volume level to the level you want
to listen to.
Using an External Equipment
AUX
To exit AUX mode, select other source.
For operation of the external equipment
Refer to its instructions.
Alarm function
If an ALARM (Emergency) signal is received from a
station while listening to the radio, the unit automatically
switches to the station broadcasting the ALARM signal,
except when you are listening to non-RDS stationsall
AM (MW) and some FM stations.
Test function
The TEST signal is used for testing the ALARM
signal.
Therefore, it makes the unit work in the same way as the
ALARM signal does.
If a TEST signal is received from a station while
listening to the radio, the unit automatically switches to the
station broadcasting the TEST signal, except when you
are listening to non-RDS stationsall AM (MW) and some
FM stations.
15-18_UX-H330&H300[B]3.p65 04.3.17, 0:02 PM18