Filter
Top Products
Preparation
10
To view an image on the TV screen, select the
video signal type correctly according to the TV
after connecting the main unit to the TV.
1 Turn on the main unit.
• Refer to “Turning on/off the main unit” on
page 11.
2 Press [SCAN MODE] repeatedly to
select the video signal type suit-
able for the TV.
• Select “PAL” for a TV only compatible with a
PAL interlaced video signal.
• Select “PAL PRG” for a TV equipped with a
component terminal and compatible with a
PAL progressive video signal.
• Select “NTSC” for a TV only compatible with
an NTSC interlaced video signal.
• Select “NTSC PRG” for a TV equipped with
a component terminal and compatible with
an NTSC progressive video signal.
NOTE
• When “PAL PRG” or “NTSC PRG” is selected,
the “PRGR.” indicator lights up in the display
window.
3 Press [ENTER/SET].
Selecting the video signal
type
UX-GN7V[US]EN.book Page 10 Monday, January 19, 2009 11:51 AM