JVC UX-G68 Stereo System User Manual


 
39
Daily Operations—Sound & Other Adjustments
(see pages 12 to 15)
Adjusting the Sound:
This function also affects the sound through the headphones.
Changing the Scanning Mode:
• You cannot change the scanning mode to progressive in the
following cases:
When your TV does not support the progressive video input.
When you have not connected your TV to the system
using a component video cord.
Setting the Clock:
• “0:00” will flash on the display until you set the clock.
• The clock may gain or lose 1 to 2 minutes per month. If this
happens, reset the clock.
Unique DVD/VCD Operations (see pages 16 to 18)
Selecting the Audio Track:
• On some DVD Video discs, you cannot change audio
languages while playing back.
Special Effect Playback:
During slow-motion playback, no sound will be reproduced.
• While zoomed in, the picture may look coarse.
Advanced Playback Operations (see pages 19
to 25)
Programming the Playing Order—Program Play:
• While programming steps...
Your entry will be ignored if you have tried to program an
item number that does not exist (for example, selecting
track 14 on a disc that only has 12 tracks).
Playing Repeatedly:
• A-B Repeat can be used within the same title while playing
a DVD Video, and within the same track for the other discs.
On-screen Bar Operations:
For DVD-R/-RW in the VR format, “PG” or “PL” appears
instead of “TITLE” on the on-screen bar.
Audio/Video File Operations (see pages 26
and 27)
Operations on the Control Screen:
• If you press ON SCREEN on the remote control during
video file playback, playback information appears on the
TV screen.
• If you press ON SCREEN on the remote control during
audio file playback, “ ” will appear on the TV screen.
Advanced Tape Operations (see pages 28 and 29)
Recording on a Tape:
• The recording level is automatically set correctly. Thus,
you can adjust the sound you are actually listening to
without affecting the recording level.
• There is leader tape which cannot be recorded onto at the
start and end of cassette tapes. Thus, when recording CDs
or radio broadcasts, wind the leader tape first to ensure that
the recording will be made without any music part lost.
• If you start recording with no cassette inserted, “NO REC”
appears on the display. If a protected tape has been
inserted, “NO REC” appears.
• You cannot open or close the disc tray while recording a
disc.
Synchronized Recording:
• Synchronized recording does not function on the file
format of MPEG-1, MPEG-2, ASF, and DivX.
Enjoying Karaoke (see pages 30 to 32) (Not
available in the Australian model)
Singing Along (Karaoke):
• Karaoke mode setting (Key Control and Vocal Masking)
can be used when selecting “DVD/CD” or “USB
MEMORY” as the source, except for DVD-VR/DVD
Audio/MPEG-1/MPEG-2/ASF/DivX files.
Even if the source is “DVD/CD” or “USB MEMORY,”
Karaoke mode setting cannot be used while “NO DISC” or
“NO DEVICE” appears on the display.
• Karaoke mode setting is automatically canceled when the
source is changed.
• When selecting “DVD/CD” or “USB MEMORY” as the
source, the microphone is not available while playback is
stopped or paused. To use the microphone, activate Key
Control or Vocal Masking.
• Karaoke mode setting is also applied to the optical digital
output signals.
• When Vocal Masking is activated, 3D Phonic will be
canceled temporarily.
• On some music discs, Vocal Masking does not provide the
correct effect.
• You can also use the microphone when selecting “FM,”
“AM,” or “AUX” as the source. When selecting “TAPE”
as the source, you can use the microphone only during tape
playback.
Timer Operations (see pages 33 and 34)
Setting the Timer:
• If you do not specify the preset station or track number
correctly while setting a timer, the currently selected
station or the first track will be played when the timer is
activated.
• When you unplug the AC power cord or if a power failure
occurs, the timer will be canceled. You need to set the
clock first, then the timer again.
• If you set DVD Video as the source, Daily Timer will not
work correctly.
Timer Priority:
If you set the Sleep Timer after Daily Timer starts playing
the selected source, Daily Timer is canceled.
UX-G68[U].book Page 39 Tuesday, December 5, 2006 4:03 PM