JVC UXG28 Speaker System User Manual


 
10
English
Playing Back a Disc
To insert a disc
You can insert discs while playing another source.
Playing Back from the USB mass storage class device
This System is equipped with a USB MEMORY terminal on
the front panel. You can connect a USB mass storage class
device such as a USB flash memory device, Digital Audio
Player (DAP) to this System. This System cannot recognize
a USB mass storage class device whose rating exceeds 5V/
500mA.
To connect the USB mass storage class device
When connecting a USB mass storage class device, refer
also to its manual.
• When disconnecting the USB mass storage class device,
make sure that the System is in the stop condition.
To play back sounds on the USB mass storage
class device
• The USB indicator on the display lights while USB
MEMORY is selected.
To start: To pause: To stop:
To release, press again.
Playable media and files
This system can playback following types of media and files.
• This system may not playback some files even though
their formats are listed above.
• Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply
with the “Compact Disc Digital Audio” standard.
Therefore, the use of Non-DVD side of a DualDisc on
this product may not be recommended.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
Media Audio CD, CD-R/RW, USB mass
storage class device
File format MP3, WMA
Audio CD CD-R CD-RW
Main Unit
ONLY
CD CD
STOP
IMPORTANT
• You cannot send any data to your USB mass storage
class device from this System.
• You cannot connect a computer to the USB MEMORY
terminal of the system.
• Always set volume to “VOL MIN” when connecting or
disconnecting the other equipment.
• Connect the USB mass stotrage class device directly to
the system. Using a USB hub may result in malfunction.
• Coded or encrypted tracks in a special method cannot be
played on the unit.
• The USB mass storage device’s battery is charged while
the System is turned on.
To start: To pause: To stop:
or
DAP
USB
MEMORY
USB
MEMORY
STOP
UX-G28[C].BOOK Page 10 Monday, November 12, 2007 10:32 AM