Filter
Top Products
– 21 –
Playing Back the Entire CD — Normal Play
You can play a CD.
1
Press CD OPEN/CLOSE 0.
The unit automatically turns on, the electronic swing
panel slides upward, then the disc tray comes out.
2
Place a CD correctly on the circle of the disc tray
with its label side up.
• When using a CD single (8 cm), place it on the
inner circle of the disc tray.
3
Press CD # / 8.
The disc tray closes, then the electronic swing panel
slides downward automatically.
The CD indicators start flashing on the display and CD
playback starts from the first track of the CD.
• If you press CD OPEN/CLOSE 0 again, the disc
tray and electronic swing panel close, but CD
playback does not start.
• All the track numbers light when the currently loaded
CD has more than15 tracks.
• When the unit finishes playing a track, its track
number goes off from the track number indicator on
the display.
CD playback stops after playing back all the tracks of
the CD.
Electronic swing
panel
Disc tray
To stop during play, press 7.
To remove the disc, press CD OPEN/CLOSE 0.
Basic CD Operations
While playing a CD, you can do the following operations.
To stop playback for a moment
Press CD # / 8.
The CD indicators light on the display and the elapsed
playing time starts flashing in the main display.
To resume playback, press CD # / 8 again.
To locate a particular point in a track during play
Press and hold ¢ or 4.
• ¢ : Fast-forwards the tracks.
• 4 : Fast-reverses the tracks.
To go to another track
Press ¢ or 4 repeatedly.
• ¢ : Skips to the beginning of the next or succeeding
tracks.
• 4 : Goes back to the beginning of the current or
previous track.
To go to another track directly using the number
buttons (on the remote control ONLY)
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Good
No good
The current track
Elapsed playing time
Track number indicator
Flashing
Ex. The CD has 12 tracks and the unit is playing the
first track.
Ex. The CD playback stops. The CD has 12 tracks.
All the tracks on the CD
Total track number
Total playing time
TRACK
CD
MD
2 3 4 5 6 7 8 9 10 11 121
TRACK
CD
MD
2 3 4 5 6 7 8 9 10 11 121
EN20-23.UX-A70MDR[B]_f 00.12.4, 10:59 AM21