Filter
Top Products
Connections
12
NOTE
• The way of connecting the system cord varies depending on the type
of the powered subwoofer.
You can enjoy the sound of an analog component.
NOTE
• The signals input to the VIDEO jack of the VCR IN jacks will be
output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.
You can enjoy the sound of a digital component.
*1
For TH-M508 only:
This system can send digital audio signals to digital component
such as MD recorder or AV receiver. For details of output signal
selection, see “DIGITAL AUDIO OUTPUT” (A pg. 37).
*2
DBS = Direct Broadcasting Satellite
NOTE
• Only digital audio signals can be input when selecting “DBS” as the
source to play. (A pg. 17) When connecting a video component such
as a DBS tuner, operate this system to listen to the sound.
• When DBS is selected as the source, PCM signal is output from
DIGITAL OUT.
Connecting the powered
subwoofer
Connecting to an analog
component
Powered
subwoofer
System cord
(supplied)
Center unit
Align the 5 marks.
Align the 5 marks.
or
SP-PWM508
SP-PWM303
RCA pin plug
cord
(not supplied)
A To composite video output
B To S-video output
C To audio output
AB C
Center unit
VCR (A C or B C)
TV (C)
Cassette recorder (C)
Composite video
cord
(not supplied)
S-video cord
(not supplied)
or
Connecting to a digital
component
Digital optical cord
(not supplied)
To digital optical output
DBS
*
2
tuner
MD recorder
Center unit
To digital optical
input
*
1
TH-M303
TH-M508
TH-M508-303[A]-04Start.fm Page 12 Wednesday, May 19, 2004 9:48 AM