Filter
Top Products
– 22 –
English
Display of Operating Status
You can view the current operating status on the TV screen.
Press the ON SCREEN button.
Pressing the above button alternates between on-screen
display ON and OFF.
• Once you have turned on the on-screen display, the track
number and playing time are always displayed on the TV
screen.
Viewing the Video Intro of Video CDs
You can check the contents of a video CD, watching about
7 seconds at the beginning of each track on the disc.
1
Play the video CD with or without PBC.
• Load the video CD with or without PBC.
• Press the CD 3/8 button, then press the 7 button.
2
Press the VIDEO INTRO button.
The Video Intro play starts whereby about 7 seconds at
the beginning of the first nine tracks will be played in
sequence.
1 2 3
4 5 6
7 8 9
• If the video CD has more than nine tracks, the tracks
whose track number is greater than nine will be
displayed on the next page when the 3 UP or ¢
NEXT is pressed.
• This function is not available in PBC mode or during
playback.
To select a track during Video Intro Play, press the number
buttons on the Remote Control to select the track to play.
Continuous play starts from the selected track. When you use
the Unit, press the VCD NUMBER button for more than 2
seconds and press the PREV 4 or ¢ NEXT buttons to
select the track, then press the SELECT CD 3/8 button.
To stop and cancel the Video Intro Play, press the 7.
Stop the Video CD playback before enter the video intro mode.
EN15-23_UX-L46&36[US&UJ]f 28/5/2002, 3:59 PM22