JVC SP-PWC3 Home Theater System User Manual


 
Advanced operations
31
You can lock the tray and prohibit the unwanted disc ejection.
On the center unit ONLY:
While the system is turned off
The system turns on and LOCKED appears on the display
window.
If you try to eject the disc, LOCKED appears to indicate that
the tray is locked.
To cancel
Carry out the same operation again.
The system turns on and UNLOCKED appears on the display
window.
IMPORTANT
Before using the remote control for the following
operation;
Set the remote control mode selector to
AUDIO.
NOTE
Before you start operation;
There is a time limit when doing the following steps. If the setting is
cancelled before you finish, start from step 1 again.
1 Press SETTING.
Example:
2 Press Cursor Y/5 to select the item
you want to set.
DEC (Decode):
When you play an external source (AUX D is selected as a
source) that was encoded with Dolby D or DTS Digital
Surround, the following symptoms may occur;
No sound comes out at the beginning of playback.
Noise comes out while searching for or skipping chapters
or tracks.
A/PCM (Auto/PCM):
Normally select this. The system automatically
detects the incoming signals.
DD: Select this if the symptoms above occur when
playing a disc (or software) encoded with Dolby
D.
DTS: Select this if the symptoms above occur when
playing a disc (or software) encoded with DTS
Digital Surround.
3 Press Cursor 3/2 to make an
adjustment or selection.
Example:
The adjustment is set and the display automatically disappears
a few seconds later.
NOTE
When “DD” or “DTS” is selected, if a signal encoded with another
digital format comes in, you cannot listen to the sound. (The
GDIGITAL or C indicator flashes.)
Tray lock
DISC 1
Press and hold
Sound settings
A
E
D/M
C.
C
P
E
DDD
C.
See page 21 for button locations.
TH-C3[B]_new.book Page 31 Thursday, May 19, 2005 1:52 PM