Filter
Top Products
20
Playing Back Tapes
Playing Back a Tape
1
Press 0 EJECT for the deck you want to use.
2
Put a cassette in, with the exposed part of the
tape down and the side you want to play
facing front.
• You can play back only type I tapes.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the last deck
which you have put a cassette into is selected.
To operate the other deck, press TAPE A/B (or A/B on
the remote control).
4
Press TAPE
33
33
3.
The tape play starts and the tape running
indicator (3) starts flashing slowly.
When the tape plays to the end, the deck automatically stops.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
To stop during play, press 7.
To operate the other deck, press TAPE A/B (or A/B on the
remote control), then TAPE 3.
To fast-forward the tape, press ¡ (or ¢/¡ on the
remote control). The tape running indicator (3) starts
flashing quickly.
To rewind the tape, press 1 (or 4/1 on the remote
control). The tape running indicator (2) starts flashing
quickly.
To remove the cassette, press 0 EJECT for deck A or
EJECT 0 for deck B.
For Deck A
For Deck B
18_20MXGT88&GA77[J].pm6 03.1.10, 4:22 PM20