Filter
Top Products
15
One Disc play
When 2 or 3 CDs are loaded on the disc trays, you can
select one particular disc to be played back.
On the unit ONLY:
1
Load CDs.
• If the current playing source is not the CD player,
press CD 6, then 7 before going to the next step.
2
Press REPEAT repeatedly so that
the 1 DISC indicator lights up on
the display.
• Each time you press the button, the indication on the
display changes as follows:
* See page 19.
3
Press one of the disc number
buttons (CD1, CD2 or CD3)
you want to listen.
Playback stops when all tracks of the
selected disc are played once and
resumes to All Disc play.
To stop during play, press 7.
• For MP3 disc, this unit can store the number of the track
that you have stopped playback. By pressing CD 6,
you can start playback again from the beginning of the
same track—Resume play (see also page 17).
To remove the disc, press 0.
To exit from One Disc play, press REPEAT repeatedly so
that ALL DISC indicator lights up on the display.
The following operations will also cancel the One
Disc play and restore All Disc play when—
• Turning off the power,
• Ejecting the carrousel, or
• Changing the source to play.
REPEAT ALL DISC* REPEAT 1 DISC*
REPEAT 1*
1 DISC
ALL DISC
(initial setting)
CD
1
CD
2
CD
3
REPEAT
1
DISC
TRACK
WOOFER
1 DISC indicator
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press DISC CHANGE to change the CD and the
carrousel comes out.
If you change CDs during play, the current play
will not stop until all CDs you have changed are
played.
To close the carrousel, press DISC CHANGE or 0.
To skip to the another CD in the carrousel
Press DISC SKIP on the remote control.
To stop play for a moment
Press CD 6.
While pausing, “PAUSE” appears on the
display.
To resume play, press CD 6 again.
To locate a particular point in a track
During play, press and
hold 1 or ¡.
• 1: Fast reverses the disc.
• ¡: Fast forwards the disc.
When using the remote control, press
and hold 4/1 or ¢/¡.
To go to another track
For Audio CD:
Turn the 4/¢ control before or during
playback.
• 4:Goes back to the beginning of the current
or previous tracks.
• ¢:Skips to the beginning of the next or
succeeding tracks.
When using the remote control,
press 4/1 or ¢/¡.
If you turn the 4/¢ control (or press 4/1 or
¢/¡ on the remote control) to select a track while
playback is stopped
The selected track starts playback.
DISC CHANGE
13_17MXGT88&GA77[J].pm6 03.1.10, 4:22 PM15