20
About Relations between Speaker Layout and Surround Modes
Available Surround modes will vary depending on how many speakers are used with this receiver.
Make sure that you have set the speaker information correctly (see pages 12 to 14).
• If only front speakers are connected, you cannot use Surround modes.
• If rear speakers are not connected, you cannot use DAP modes and All Channel Stereo.
Creating Realistic Sound Fields
Front
speaker
TV
Center speaker
Front
speaker
When the center speaker is connected
(3 channels):
Each time you press SURROUND ON/OFF, Surround modes turn on or off.
Turning on or off the Surround modes
(Front panel)
(Remote)
SURROUND ON/OFF
SURROUND
ON/OFF
Each time you press SURROUND MODE, Surround modes change as follows:
Selecting the Surround modes
Ex.: “PL II MUSIC” has been selected.
L
S.WFR
SPK
PRO LOGIC ΙΙ DSP H.PHONE
AUTO MUTING
TUNED
STEREO
INPUT ATT
DIGITAL AUTO
LINEAR PCM
R
SURROUND OFF
PL II MOVIE
or
PL II MUSIC
TV
Center speaker
Front
speaker
Front
speaker
Rear
speaker
Rear
speaker
When the center and rear speakers
are connected (5 channels):
When the rear speakers are connected
(4 channels):
Front
speaker
TV
Rear
speaker
Front
speaker
Rear
speaker
Each time you press SURROUND ON/OFF, Surround modes turn on or off.
Turning on or off the Surround modes
(Front panel)
(Remote)
SURROUND ON/OFF
SURROUND
ON/OFF
Each time you press SURROUND MODE, Surround modes change as follows:
Selecting the Surround modes
(Remote)
SURROUND MODE
(Front panel)
SURROUND
MODE
L
S.WFR
SPK
PRO LOGIC ΙΙ DSP H.PHONE
AUTO MUTING
TUNED
STEREO
VOLUME
INPUT ATT
DIGITAL AUTO
LINEAR PCM
R
PL II MOVIE
LIVE CLUB
DANCE CLUB
ALL CH STEREO
PAVILION
HALL
(Back to the beginning)
PL II MUSIC
Speaker Layout
Available Surround modes
Ex.: “PL II MUSIC” has been selected.
L
S.WFR
SPK
PRO LOGIC ΙΙ DSP H.PHONE
AUTO MUTING
TUNED
STEREO
INPUT ATT
DIGITAL AUTO
LINEAR PCM
R
SURROUND OFF
Last selected
Surround mode
(Remote)
SURROUND MODE
(Front panel)
SURROUND
MODE
L
S.WFR
SPK
PRO LOGIC ΙΙ DSP H.PHONE
AUTO MUTING
TUNED
STEREO
INPUT ATT
DIGITAL AUTO
LINEAR PCM
R
PL II MOVIE
PL II MUSIC
Note:
When the digital multichannel software such as Dolby Digital or DTS Digital
Surround is played back, the appropriate multichannel Surround mode is
automatically activated ("DOLBY DIGITAL" or "DTS SURROUND") by pressing
SURROUND ON/OFF (with the digital input mode selected).
• For Dolby Digital 2 channel software, you need to select "PLII MUSIC" or
"PLII MOVIE" by pressing SURROUND MODE.
• For more details, see the table on page 19.
Note:
When the digital multichannel software such as Dolby Digital or DTS Digital
Surround is played back, the appropriate multichannel Surround mode is
automatically activated ("DOLBY DIGITAL" or "DTS SURROUND") by pressing
SURROUND ON/OFF (with the digital input mode selected).
• For Dolby Digital 2 channel software, you need to select "PLII MUSIC" or
"PLII MOVIE" by pressing SURROUND MODE.
• For more details, see the table on page 19.
EN18-23.RX-5020/5022V[J]_f 01.12.7, 11:29 AM20