Filter
Top Products
12
English
Basic Operations
DIGITAL AUTO SPK
ONE TOUCH OPERATION
BASS BOOST
PRO LOGICDSP H.PHONEAUTO MUTINGTUNEDSTEREOTANEWSINFO
VOLUME
INPUT ATT EON RDS SLEEP
CH–
12
ANALOG
L
LINEAR PCM
DIGITAL
CR
S.WFRLFE
LS RSS
STANDBY
STANDBY/ON
DIGITAL
PRO LOGIC
DIGITAL
SURROUND
SURROUND
DSP
DVD MULTI
FM MODE MEMORY
ON/OFF
FM/AM TUNING
DVD VCR TV SOUND
SURROUND/DSP
OFF
INPUT DIGITAL
RX–6030V
AUDIO/VIDEO CONTROL RECEIVER
INPUT ANALOG
INPUT ATT
FM/AM RESET
Changing the Source Name
When you have connected a CD recorder to the TAPE/CDR
jacks on the rear panel, change the source name to CDR so
that “CDR” appears on the display when selected as the
source.
RX-6030VBK/RX-6032VSL
RX-5030VBK/RX-5032VSL
1
Press TAPE/CDR (SOURCE NAME) on the
front panel.
• Make sure “TAPE” appears on the display.
2
Press again and hold SOURCE NAME
(TAPE/CDR) on the front panel until
“ASSIGN CDR” appears on the display.
To change the source name from “CDR” to “TAPE,” repeat
the same procedure above (in step
1
, make sure “CDR”
appears on the display).
Note:
Without changing the source name, you can still use the connected
components; however, you may experience one of the following
inconveniences:
• A different source name will appear on the display when you select
the target component.
• You cannot use the digital input (see page 16) for the CD recorder.
• You cannot use the COMPU LINK remote control system (see page
29) to operate the target component.
SOURCE NAME
(TAPE/CDR)
PHONES
jack
SPEAKERS
ON/OFF
MUTING
VOLUME +/–
MASTER VOLUME
control
Remote
NOT
Front panel Remote control
Audio source
selection buttons
Audio source
selection
buttons
10 0
10
TA/NEWS/INFO
DISPLAY MODE
Selecting Different Sources for Picture
and Sound
You can watch the picture from a video component while
listening to sound from another component.
Press one of the audio source selection buttons while
watching the picture from a video component such as the
VCR or DVD player.
• Once you have selected a video source, pictures of the
selected source are sent to the TV until you select another
video source.
RX-6030VBK/RX-6032VSL
On the front panel From the remote control
RX-5030VBK/RX-5032VSL
On the front panel From the remote control
SOURCE NAME
FM/AMTAPE/CDRCD
TAPE/CDR CD DVD
FM/AM TV SOUND VCR
ANALOG
/DIGITAL
CD FM AMTAPE/CDR
SOURCE NAME
TAPE/CDR CD DVD DVD MULTI
FM/AM TV SOUND VCR
ANALOG
/DIGITAL
DIMMER
DIMMER
SOURCE NAME
TAPE/CDR
CD FM/AM
CD FM AMTAPE/CDR
SOURCE NAME
EN11-17_RX-60_5030[C]f 02.12.24, 18:4012