JVC RC-BM5 CD Player User Manual


 
16
CASSETTE PLAYBACK
Notes on cassette tapes
Use only type-I normal tapes. The recording/playback
characteristics of this unit are those for normal tapes,
which have different characteristics from CrO
2 and
metal tapes.
• The use of tapes longer than 120 minutes is not
recommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch roller and
the capstan.
Loose tape may cause trouble. Gently tighten the tape
with a pencil as shown in the figure below.
To prevent recordings from being accidentally erased,
remove the tab(s) with a screwdriver. After the tabs
have been broken off, reseal the slots with adhesive
tape to erase or re-record.
Loading a cassette
1
Press the § STOP/EJECT button to open the
cassette holder.
2
Load a cassette with the open side up and the
playback side facing out as shown in the figure
below.
+ Forward direction
CD POTABLE SYSTEM RC-BM5
3
Close the cassette holder by pressing it gently and
firmly.
The cassette holder clicks back into position.
Turn the pencil to take up
the slack.
02_01-22_RCBM5_J_En.p65 5/21/02, 2:56 PM16