Filter
Top Products
12
Programmed playback of an audio CD
Up to 20 tracks can be programmed to play in any desired order.
STANDBY
CD POTABLE SYSTEM RC-BM5
31
3
6 6 1 2,4
3
2,4
1
Press the CD/RANDOM button to enter CD mode.
2
Press the PROGRAM button in stop mode.
Alternatively, press the PROGRAM/SET button on
the remote control unit.
The PROG. indicator and the current track number
start blinking in the display window.
3
Press the 4 or ¢ button to select a desired
track to be programmed.
Alternatively, use the number buttons on the remote
control unit.
4
Press the PROGRAM button.
“OK” is displayed and the PROG. indicator lights up
steadily.
5
Repeat steps 2 to 4 to program other tracks.
6
Press the 3/8 button to start programmed
playback.
To clear the program, press the 7 button in stop mode.
“PROG CLEARED” scrolls through the display
window. The program is also cleared when you open the
disc door.
To check the programmed tracks, press the 4 or
¢ button repeatedly in stop mode.
Each time you press the button, the program number and
track number are displayed in the display window.
Note:
You cannot program more than 20 tracks. “PRG FULL”
is displayed when you try to program the 21st track.
02_01-22_RCBM5_J_En.p65 5/21/02, 2:56 PM12