Filter
Top Products
5
English
LEFTRIGHT
AUX
LINE
OUT
IN
VIDEO
OUT
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. Open each of the terminals and insert the speaker wires firmly, then close the terminals.
2. Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–)
terminals marked RIGHT on the System.
Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–)
terminals marked LEFT on the System.
Connecting Auxiliary Equipment
Connect VCR to LINE OUT and VIDEO OUT
To record Video CDs and CD-Gs on the VCR, connect VIDEO
OUT and LINE OUT to VCR.
Audio in Video in
Video in
VIDEO
OUT
Video in
When you connect the Unit to TV
When you connect the Unit to VCR and TV
Connect VCR to TV
so that you can view
the pictures on the
TV screen.
Connect TV to VIDEO OUT
To play back pictures on your TV.
Connect VCR or other equipment to AUX IN
To listen to this source, press the AUX button.
Note: the LINE OUT jacks will transmit audio signals from the selected TAPE, CD or TUNER, to the connected equipment.
No audio signal comes out from the AUX IN jacks to the LINE OUT jacks.
Audio out
Video out
IMPORTANT: Use speakers with the correct impedance only.
The correct impedance is indicated on the back panel.
CAUTION:
SPEAKER IMPEDANCE
6 – 16 OHMS.
SPEAKERS
RIGHT LEFT
+
–
+
–
SP-MXJ111V leftSP-MXJ111V right
EN.01-36.MX-J111V[U]/f 99.9.17, 3:57 PM5